|
Southwind 940 Cabin Heater |
|
|
|
Southwind 940 Cabin Heater & Associated Systems, STC SA915NW.
FAA approved installation for the Southwind 940 heater, with defrost
vents. This is a very effective heater system that will keep the
cabin heated even in very cold climates.
The Southwind 940 heater uses fuel from the main feul tank and has the following specifications.
Fuel consumption:
Low Heat: 0.12 gph
High Heat: 0.37 gph
Heat output:
Low Heat: 15,000 btu/hr
High Heat: 27,500 btu/hr
Please keep in mind these are approx. numbers, this heater has a number
of models and there is a slight varience in the performance of each
model. The numbers indicated here are for the latest model
available.
Installation Comments:
Installation of this kit can be done at our facility in Fallon NV. for
between 30 and 40 hours depending on how you want your panel
arranged. General condition and status of the aircraft can impact
this installation estimate as well. This estimate doesn't include
any painting for new parts or the external exhaust vents.
Installation can be perfomed by any A&P but you can expect to
double this installation time at a minimum if there is no experience
installing this kit.
Southwind Cabin Heater
Price: $7000 ($4500 deposit required with order)
Availability: 3-6 Weeks
Note: If you have a southwind heater that you can
provide to us we can offer you a discount for the core value.
This discount varies depending on the model of the heater so please
contact us.
Photos:
Exterior Exhaust Vents (Larger Image)
Heat Supply Vent & Ducting (Larger Image)
Installed Heater (Larger Image)
Installed Heater (Larger Image)
|
